Ads Top

How to Update Sony Xperia XA2, XA2 Plus and XA2 Ultra FTF Stock Firmware File for 50.1.A.13.83 January 2019 Security

Hello Guy's, In this post, Today I will provide to you "How to Update Sony Xperia XA2, XA2 Plus and XA2 Ultra FTF Stock Firmware File" This post is about installing the latest January 2019 Security Update for Xperia XA2, XA2 Plus and XA2 Ultra.The update is rolling via OTA and will reach every user around the globe. According to Sony Xperia, the update is sent in a phase-wise manner and it will take a many days or weeks to reach the update to everyone. You can check for the software update manually on your Sony Xperia device. If still not received any OTA update, then you can download and install 50.1.A.13.83 January 2019 Security for Xperia XA2,XA2 Plus, and XA2 Ultra.



Important Note
How to Check Software Update on your Sony Xperia Device:
To receive the update, you must be logged in as the owner, that is, the primary user, to update the device. Now on your Sony device, make sure you have a stable WiFi or 4G data-connection to download the software update. Charge your phone to at least 70% battery. Before upgrading, also make sure to take a full backup of your data to avoid any problem in case things go wrong.

  • On your home screen.
  • Go to Settings option.
  • Tab About phone ➔ Software Update.
If no new software is available, it’s possible that you may not have enough free memory on your Sony device.
  • In case if an update is available.
  • Click the "Download" to start downloading.
  • When the download is finished, open the Notification Note again if it is closed, then tap Install and follow the on-screen guide to complete the installation.
 
Pre-Requisites:
 
  Download Stock Firmware File
         Firmware File Name
 Download Link
Xperia XA2 (H3113) Firmware
Xperia XA2 (H3123) Firmware
Xperia XA2 Dual (H4133) Firmware
Xperia XA2 Ultra (H3213) Firmware
Xperia XA2 Ultra Dual (H4213) Firmware
Xperia XA2 Ultra Dual (H4233) Firmware
Xperia XA2 Ultra (H3223) Firmware
Xperia XA2 Plus (H4413) Firmware
Xperia XA2 Plus (H3413) Firmware
 


Instructions for Update Sony Xperia XA2, XA2 Plus and XA2 Ultra FTF Stock Firmware:
  1. Download Sony Flash Tool and install on your computer.
  2. Download the FTF Firmware Files and add the firmware file to your Sony Flash Tool ➔ Firmware folder.
  3. Make sure to install the Flash tool drivers on Computer by finding the installed location of Sony Flash Tool (C:\Users\➔Computer User Name➔\flashtool).
  4. Now download the Sony USB Drivers from the above link and install it.
  5. Now you need to enable USB Debugging on your Sony Xperia Device.
  6. To Enable the USB Debugging, ➔ Activate the Developer Option.
  7. Go to SettingsAboutSoftware InformationMore ➔ Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled".
  8. Once your developer option is active, Go back to your SettingsOpen developer option ➔ Enable USB Debugging.
  9. Now run the Sony Xperia Flashtool.exe on your Computer
  10. Power off and now hold Volume Down button and connect the phone to the computer via USB Cable.
  11. Once your phone detects on Sony Flashtool window
  12. Now in the Flashtool Window, Tap on Flash device ➔ Flash mode and select the firmware from the firmware folder in your computer.
  13. Recommended to clean install by selecting the Wipe, User data, and app log (This will wipe your data and do a clean installation)
  14. Now tap on OK button and wait for the firmware to load completely.
  15. Your installation process will start, now wait for a few minutes to complete the installation.
We Hope you found this article helpful.
Powered by Blogger.