Ads Top

Lava Z61 Pro Flash File LCD Fix Latest Firmware

Download Lava Z61 Pro Flash File Pac Firmware ROM


Are you thinking of flashing your Lava Z61 Pro smartphone and looking for the desired flash file? Then this post may be helpful for you. So read the whole post carefully, because I have shared the download link of all the equipment including flash file, USB driver, flash tool to flash the Lava Z61 Pro Android mobile phone. Also discussed the flushing procedure step by step.

 

 

The Lava Z61 Pro Flash File is using to solve Hang logo, Slow performance, Downgrade, Upgrade Firmware, Re-install, FRP Remove of your Samsung device. The flash file currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.

 

 



 

 

Download Lava Z61 Pro Stock Firmware ROM (Flash File)



Here we are provide Lava Z61 Pro official tested Stock ROM. You can download & use the Lava Z61 Pro flash file Stock ROM without any manufacturing issue. Remember! Before download the Stock ROM please check the version of your device and this.

 

File Name: Lava Z61 Pro
Processor: SP9863A_9.0
File Type: Pac
File Size: 1.3GB

 


 

 

 

How to Flash

 

Before flashing the flash file on your Lava Z61 Pro, you should download the Firmware. Then download and install the USB Drivers and Flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. Take a complete backup of your device after start flashing process.

 


 

Step to Flash Lava Z61 Pro

 

Following below steps to install Firmware your Lava Z61 Pro SPD device using SPD Flash Tool, CM2/Miracle or other's flash tools. Also We have shared a short tutorial of SPD Flash Tool.

 

  1.  First of Download & extract the Lava Z66 flash file on your PC.
  2. Then install USB driver on your PC.
  3. Double click to open SPD Flash Tool
  4. Select and include Flash File with tool.
  5. Press Start button on the tool
  6. Connect the device to PC via USB cable and Boot key.
  7. Your flash process will begin
  8. When the flash download is finished, it will show on PC screen
  9. Then unplug the USB cable and reboot your device.
  10.  That's ok! Now start your flash process.

 

That’s it, guys. We hope that you’ve installed the flash file on your device successfully.

 


No comments:

Powered by Blogger.