Ads Top

Lava Z66 Flash File SP9863A Pac Stock ROM

Download Lava Z66 Flash Firmware File Pac Stock ROM

Are you thinking of flashing your Lava Z66 smartphone and looking for the desired flash file? Then this post may be helpful for you. So read the whole post carefully, because I have shared the download link of all the equipment including flash file, USB driver, flash tool to flash the Lava Z66 Android mobile phone. Also discussed the flushing procedure step by step.

 



The Lava Z66 Flash File is using to solve Hang logo, Slow performance, Downgrade, Upgrade Firmware, Re-install, FRP Remove of your Samsung device. The flash file currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.

 

 



 

Talking about: The Lava Z66 smartphone runs with Android 10 operating system. The device sports a 6.08" IPS LCD display having a 13MP+5MP dual primary and an 13MP Single selfie camera. The Lava Z66 has 3GB RAM and 32GB of inbuilt storage options. It’s  powered by 1.6 GHz Octa core processor and SpreadTrum UniSoc SP9863A chipset. This phone comes with a 3950 mAh (Typ) Li-Polymer battery.



 

Download Lava Z66 Stock Firmware ROM (Flash File)


Here we are provide Lava Z66 official tested Stock ROM. You can download & use the Lava Z66 flash file Stock ROM without any manufacturing issue. Rememerd! Before download the Stock ROM please check the version of your device and this.


File Name: Lava Z66 SW_V05_20200710
Processor: SP9863A_3c10
File Type: Pac
File Size: 1GB

 


 

File Name

Download Link

Lava Z66 Firmware

AFileHost | MEGA

Lava Z66 Flash Tool

Download Here

Lava Z66 USB Driver

Download Here


 

 

 

How to Flash

 

Before flashing the flash file on your Lava Z66, you should download the Firmware. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. Take a complete backup of your device after start flashing process.


 

Step to Flash Lava Z66

 

Following below steps to install Firmware your Lava Z66 SPD device using SPD Flash Tool, CM2/Miracle or other's flash tools. Also We have shared a short tutorial of SPD Flash Tool

  1. First of Download & extract the Lava Z66 flash file on your PC.
  2. Then install USB driver on your PC.
  3. Double click to open SPD Flash Tool
  4. Select and include Flash File with tool.
  5. Press Start button on the tool
  6. Connect the device to PC via USB cable and Boot key.
  7. Your flash process will begin
  8. When the flash download is finished, it will show on PC screen
  9. Then unplug the USB cable and reboot your device.
  10. That's ok! Now start your flash process.

 

That’s it, guys. We hope that you’ve installed the flash file on your device successfully.

 


No comments:

Powered by Blogger.