Ads Top

Walton Primo HM5 Flash File MT6761 (FRP Remove Tested )

Download Walton Primo HM5 Flash File Official Stock Firmware ROM

 

Are you thinking of flashing your Walton Primo HM5 samrtphone and looking for the desired Stock Firmware ROM? Then this post may be helpful for you. So read the whole post carefully, because I have shared the direct download link of all the equipment including flash file, USB driver, flash tool to flash the Walton Primo HM5 Android device. Also discussed the installing procedure step by step.

 


The Walton Primo HM5 Stock Firmware ROM is using to solve Downgrade, Upgrade Firmware, Re-install of your Android device. The flash file currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.

 

 

 

Talking about: The Walton Primo HM5 samrtphone runs with Android 10 operating system. The device sports a 6.1 inch IPS LCD display having a 13MP+2MP dual primary and an 8MP Single selfie camera. The Walton Primo HM5 has 3GB RAM and 64GB of inbuilt storage options. It’s  powered by MediaTek Helio A20 Processor and MT6761 chipset. This phone comes with a non-removable Non-removable Li-Po 4900 mAh battery.

 

 

 

Download Walton Primo HM5 Stock Firmware ROM (Flash File)

 

File Name: Walton Primo_HM5_V13_20200822

Processor: MediaTek Helio A20

Chipest: MT6761

File Type: Official Scatter

File Size: 2GB

 

 

File Name

Download Link

Walton Primo HM5

Download Here

Flash Tool

Download Here

USB Driver

Download Here


 

 

How to Flash

 

The guideline is simple and easy! All you have to do is simply download the above-given Stock ROM and Tools on your PC and then follow the given instruction to install the Stock ROM on Walton Primo HM5 Android device using Sp Flash Tool. Yes, this guide is also helpful to Download, Upgrade, Downgrade, Re-install and any software related problem.

 

Step to Flash Walton Primo HM5

 

Following below steps to flash your Walton Primo HM5 Stock Firmware ROM using Sp Flash Tool, CM2/Miracle or other's flash tools. Also We have shared a short tutorial of Sp Flash Tool.

  1. Download and extract the Walton Primo HM5 Stock ROM package on your PC.
  2. After extracting the package, you will find USB Drivers, flashing tool, and Stock ROM files.
  3. Install the provided MediaTek Helio USB drivers on your PC. (Skip this step if you already have the drivers installed on your PC).
  4. Launch the SP Flash Tool and load the scatter files inside the flash tool.
  5. Connect your device to the PC via USB cable and begin the firmware flashing process.
  6. Once the flashing is completed, you will see a success message.
  7. Disconnect your device from the PC and restart the device.

 

That’s it, guys. We hope that you’ve installed the flash file on your device successfully.

No comments:

Powered by Blogger.