Walton MH19 Flash File SC6531E 100% TESTED

You are searching Walton MH19 Flash File? You come in the right place. Using this firmware, you can flash the firmware file to troubleshoot any issues or problems on your device. Yes! With this guide, you can resolve problems such as Pin remove/unlock, Full flash, Dead recovery, As can be seen Automatically restart phone and more also fix any software related problems.

 


To flash the firmware file on your Walton Olvio MH19, we are using the Miracle Thunder as this device is powered by SCR. We have shared all the requirement files to download and install the firmware on your device.



walton mh19 flash file firmware




Download Walton MH19 Flash File Firmware

 

File Name: Walton Olvio MH19
Processor: SC6531E
File Type: Bin
File Size: 4MB
File Status: Tested

 

walton mh19 flash file

 

 


 

 

Download Walton MH19 SC6531E Flash File



 

Need also: Walton S34 6531E Flash File

 

 

Feature of Walton Olvio MH19


  • – Dual SIM (G+G), Dual Standby
  • – Memory card support (Micro SD up to 32 GB)
  • – 2.8 inch, QVGA display
  • – Digital camera with video recording
  • – MP3/MP4/3GP Player
  • – Bluetooth/Torch Light
  • – Wireless FM radio with recording
  • – Mobile Data – Yes
  • – Battery- 1500mAh Li-ion

 

 

How to Flash


Before installing the Firmware on your Walton MH19, you should download the firmware flash file. Then download and install the USB Driver and Flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Firmware importance and firmware details above.



Step to Flash Walton MH19 Flash File on your mobile phone:



Following below steps to flash your 5Star BD17 mobile phone using CM2/Miracle or other’s flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.

  1. Download and extract the flash file on your computer.
  2. Install the USB Driver on your computer.
  3. Lunch tool on your PC screen
  4. Select SPD
  5. Choose 6631E SP
  6. Add file on the tool
  7. Click the Start button.
  8. Connect your device to computer via USB cable
  9. Insert battery in mobile.


That’s it, guys. We hope that you’ve installed the Stock Firmware on your Firmware device successfully. And, if we don’t work with this guide. Then do it in the comments section below

1 Comments

  1. This comment has been removed by a blog administrator.

    ReplyDelete

Post a Comment

Previous Post Next Post