How to Update & Install Homecare V8 Stock Firmware File


Now you coming form right place for Update & Install Homecare V8 Stock Firmware File. I will provide in this post homecare v8 smartphone device update guideline without pc and stock firmware install require equipment's. Also in addition page from this, all the information related to this Homecare V8 device is described here.




The Homecare V8 Android device keeps running on Android 6.0 Operating System with Qualcomm Snapdragon 652 1.8GHz Octa-Core processor. The processor work related to 4GB RAM + 128GB ROM and bolster 128GB TF Card Expansion. It is powered by 3400mAh Battery, which bolsters QC3.0 Quick Charge.




Read Also:




Update Pre-requisite
  1. Minimum of 70% (not charging)
  2. Minimum of 20% (while charging)U
  3. Update can also be done over a Wi-Fi network.



Steps to Update
  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate: Settings Settings icon > System updates.
  3. Tap Check for new system update.
  4. If prompted, tap OK.
  5. If an update is available, tap Download. Note If presented with "Your RED H1A1000 is up to date", tap OK.
  6. Tap Install Now.



 


Alert Before Install Firmware
 
Dear worker, Before downloading the firmware, backup the firmware and save it to your computer.
If a problem occurs after downloading the firmware then you can re-download the firmware and return it to the previous state.
Your device should be fully charged before downloading.



Firmware Install Guideline
  1. Download & Ectract QFIL Folder, Click the QFIL application file and Open it.
  2. Once you open it, you will see the following screen on your computer
  3. Turn your Phone off using the power button
  4. Once your Phone is switched off, Now Hold the Volume UP button and try to connect your phone to PC/Laptop using USB Cable
  5. Your Phone model will be displayed on your PC
  6. Now Click the Browse option to select the downloaded Stock ROM on QFIL application
  7. Now browse and Select the right firmware you downloaded from the folder
  8. Now Click The Download button to start the Installation process.
  9. Installation Process will take almost 10-15 minutes to complete. Be Patient! Don't disconnect your phone from computer.
  10. Once it is done, your device will reboot automatically.
  • That's it ! You have completed the installation process.!
Previous Post Next Post