The
Samsung Galaxy J7 Prime 2 mobile features a 5.5" (13.97 cm) display
with a screen resolution of Full HD (1080 x 1920 pixels) and runs on
Android v7.0 (Nougat) operating system. The device is powered by Octa
core, 1.6 GHz, Cortex A53 processor paired with 3 GB of RAM. As far as
the battery is concerned it has 3300 mAh. Over that, as far as the rear
camera is concerned this mobile has a 13 MP camera.this phone has got a Mali-T830 GPU. On board storage is at 32 GB with the option to expand the memory by Yes Up to 256 GB.
To flash root file on Samsung Galaxy J7 Prime 2, you need software known as Odin Tool.
Download the Samsung Galaxy J7 Prime 2 root firmware file, drivers. then you
can follow our guide to install root file the on Samsung Galaxy J7 Prime 2 Smartphone.
Prerequisite
Take a complete backup your device data.
Download SuperSU-v2.82
Download & Install Samsung USB Driver
Download Latest Odin Flash Tool
Download TWRP Recovery for Galaxy J7 Prime 2
Download Samsung Galaxy J7 Prime 2-G611F Root File
The guideline is simple and easy! All you have to do is simply download the above-given root firmware file and tools on your computer and then follow the given instruction to root on Samsung Galaxy J7 Prime 2 using Odin Tool. Yes, this guide is also helpful to Read, Write or fix any software malfunctioning problem.
Steps to Install Root File on Samsung Galaxy J7 Prime 2-G611F
Prerequisite
Take a complete backup your device data.
Download SuperSU-v2.82
Download & Install Samsung USB Driver
Download Latest Odin Flash Tool
Download TWRP Recovery for Galaxy J7 Prime 2
Download Samsung Galaxy J7 Prime 2-G611F Root File
The guideline is simple and easy! All you have to do is simply download the above-given root firmware file and tools on your computer and then follow the given instruction to root on Samsung Galaxy J7 Prime 2 using Odin Tool. Yes, this guide is also helpful to Read, Write or fix any software malfunctioning problem.
Steps to Install Root File on Samsung Galaxy J7 Prime 2-G611F
- Download & Extract Zip File on your PC.
- Enable Developer mode Settings on your device.
- Enable USB Debugging mode on your device.
- Enable OEM unlock in The Developer option
- Now you go to Download mode so power off your device
- Than press and Hold Volume Down button + Home button + Power button.
- Than press volume up.
- Connected your device to computer via USB Cable.
- Open odin tool click PDA or AP select TWRP-3.2.1-For-Galaxy-J7-Prime.tar ODIN and click start button
- After Process go to Recovery Mode So Press
- Volume Down button + Home button + Power button. Install SuperSU-v2.82 After root file install.
- Click Reboot System.