Condor Plume L3 Plus Flash File Firmware [Stock ROM]

On this post, You will find out the Condor Plume L3 Plus Flash File Firmware direct download link and install guideline. Also in addition page from this, all the information related to this flash firmware file is described here. We've provide the USB driver and flash tool to flash this phone in this firmware package.
The Condor L3 Plus smartphone is powered by Octa-core Snapdragon 430 CPU of 1.4 GHz processor, assisted by Adreno 505 GPU, It's runs on android OS 8.1 oreo of 3GB RAM and 32GB expandable storage.

Download Firmware ROM


How to Flash
To flash on Condor Plume L3 Plus Flash File Firmware, you need software known as QFIL Flash Tool. Download the Condor Plume L3 Plus Flash File, drivers, and QFIL Flash Tool, then you can follow our guide to install the flash file on this smartphone.


Prerequisites
Download and install
QFIL Flash Tool on your windows PC.
Download and Install the Snapdragon USB Driver on your Windows PC.
You should have a Windows PC for this instruction.
Make sure that your Condor Plume L3 Plus has at least 70% charge left.
It is always recommended to take a backup of your Itel Alpha Device. [Follow below once]

Once you have the above prerequisites, you can proceed to Instructions to Install Flash File on Condor Plume L3 Plus.


Steps to install Flash Firmware
  1. Now in the QFIL Folder, Click the QFIL application file and Open it.
  2. Once you open it, you will see the following screen on your computer
  3. Turn your Phone off using the power button
  4. Once your Phone is switched off, Now Hold the Volume UP button and try to connect your phone to PC/Laptop using USB Cable
  5. Your Phone model will be displayed on your PC
  6. Now Click the Browse option to select the downloaded Stock ROM on QFIL application
  7. Now browse and Select the right firmware you downloaded from the folder
  8. Now Click The Download button to start the Installation process.
  9. Installation Process will take almost 10-15 minutes to complete. Be Patient! Don't disconnect your phone from computer.
  10. Once it is done, your device will reboot automatically.
  11. That's it ! You have completed the installation process.!
Make sure you are flashing the right flash firmware file, We are not responsible for any harm that might come to your device.

Post a Comment

Previous Post Next Post