Download Xiaomi Mi Mix 3 5G Latest USB Driver

The Xiaomi Mi Mix 3 5G runs on Android OS v9.0 (Pie) out of the box. It comes with a Li-Po 3200 mAh, non-removable battery. It is powered by Qualcomm Snapdragon 855 chipset, 6 GB of RAM and 64 GB of internal storage. The smartphone features a 6.39 inches AMOLED display with 1080 x 2340 px resolution.

The USB driver makes almost every task which needs to be performed by connecting the device to computer easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it...


Before you proceed to download, it is suggested to you to remove the previously installed vivo s1 pro from your windows PC in case you have installed it. Once you are done, Click the below link to download USB Drivers on your computer.

Download Xiaomi Mi Mix 3-5G ADB Driver

USB Driver Type ADB Driver
USB Driver Purpose Secure your Mix 3 to a PC
File Size 8 MB
USB Driver link Click here to Download

Download Xiaomi Mi Mix 3-5G Qualcomm Driver

USB Driver Type Qualcomm Driver
USB Driver Purpose Secure your Mix 3 to a PC
File Size 9 MB
USB Driver link Click here to Download
 

This Qualcomm HS-USB Qdloader driver is successfuly tested on windows pc [WXp, W7, W8/8.1 and w10]

Qualcomm Snapdragon QDLoader USB Driver is a driver that is a must need to connect your Snapdragon Chipset based device with a computer. Since nowadays many Phone brands like OnePlus, Samsung, Xiaomi Redmi, Lenovo,Vivo etc. are using the Qualcomm Processor Chipset in their smartphones. This makes it all the more essential that these devices have to be connected to the PC through the Qualcomm Drivers Only.Qualcomm Snapdragon QDLoader USB Driver is a driver that is a must need to connect your Snapdragon Chipset based device with a computer.


How to Install Android USB Driver
  1. Download the USB driver and extract it on your windows PC.
  2. Now, Open Device Manager > Action > Add legacy hardware.
  3. Next, click “Next” in the Add legacy hardware wizard.
  4. Currently, select “Install the hardware that I manually select from the list (Proceed)” and click “Next“.
  5. When done choose “Show all devices“, click “Next” and select the extracted file manually from your PC.
  6. Now to start installing your new hardware, click “Next” once again.
  7. Click “Install” in the Windows security prompt window.
  8. Next, click “Finish” to complete the installation.

Post a Comment

Previous Post Next Post