Symphony L130 Flash File (LCD FIXED) SC6531E-HW All Version

Did you finally flash your Symphony L130 device and want to install the flash file again? If so, then we will help you to install flash file on Symphony L130 device. Since Symphony L130 is a vairous device, we need to use Flashtool to flash the Firmware on this device. If you have never done this before then don’t worry. We will guide you through all the necessary steps.


Talking about Spec: The Symphony L130 mobile features a 2.4" QVGA display and runs on 32 Mb Flash + 32 Mb RAM. The device is powered by Dual Standby processor paired with 32 GB Micro SD. As far as the battery is concerned it has 2500mAh Li-ion Battery. Over that, as far as the rear camera is concerned this mobile has a 0.3MP digital camera.
If you’re facing any kind of software issue in your device, then installing stock ROM on Symphony L130 will solve all the problems. Whether it be lagging issue, software issues or performance issues.

Download Symphony L130 Flash File


Here is the download link three version of Symphony L130 flash file, First select the file of your choice then download. 


File Name: Symphony L130

Processor: SC6531E

Hardware Ver: HW1 | HW 2 | HW3 | HW4 (include 4 files)

File Type: Bin

File Size: 4MB


How to Install Flash File on Symphony L130:

To make this guide easier for new users, we are going to divide this into multiple parts. First, we will help you to setup device drivers and Flash software. Then we will begin with the actual process followed by the downloading flash file. So are you ready?

Now, before we get straight to the steps to install Flash File on Symphony L130, let us take a look at some of the prerequisites.

Once you have the above prerequisites, you can proceed to Instructions to Flash File on Symphony L130.

Instructions to Flash File on Symphony L130:

  1. Download and extract the Symphony L130 flash file on your computer.
  2. Install the USB Driver on your computer.
  3. Select SPD
  4. Open crack/Cm2SPD or another tool
  5. Choose SPD6631E SP/6531E
  6. Add file on the tool
  7. Click the Start button.
  8. Connected your phone USB cable to computer.
  9. Insert battery in mobile.
That's ok! Now started your flash the installation process.!

After downloading the firmware file for Symphony L130, you can flash the firmware. If you are doing it for the first time then don’t worry. Here is a detailed guide which you can follow to flash firmware on Symphony L130.

Post a Comment

Previous Post Next Post