Samsung Galaxy A50s Combination Firmware File

Download Samsung Galaxy A50s Combination Firmware Files for Remove FRP

Have you reset your Samsung Galaxy A50s smartphone factory data? Can't use your phone normally now? So does Google recommend verifying the Google Account on the screen of your phone? Then you can make your phone unusable by using our firmware below.

Recommend for you;

In this post we have given this poster below all the information, tools and usage rules needed to solve this problem.

Download Samsung Galaxy A50s Combination Firmware Files

Now, in order to do an FRP Bypass on your Samsung Device, you will need the Combination ROM files for the device. But wait, before we get straight to How to Download and Install Combination ROM on Samsung Galaxy M30s, we would like to clear some things.
  • Downgrade Your device, install software system Android version older than the current version.
  • Unlock the device protection with the Google Account Google FRP.
  • Fixed the Root device key-DRK problem.
  • Fix the problems of stopping Samsung device in the Recovery Mode.
  • Fix the problems of stopping Samsung device in the Samsung logo.
  • Fixed problems with the IMEI serial number.


How to Remove FRP on Galaxy A50s

Follow these guide carefully to remove FRP lock using Galaxy A30s firmware files on ODIN Tool. Now, let us take a look at the prerequisites to remove FRP lock on Samsung Galaxy A50s. Should we?

  • This guide is only for the Samsung Galaxy A50s.
  • Download and install Samsung latest USB drivers on your PC.
  • Make sure that you have Download latest ODIN on your PC.
  • You must have downloaded Samsung Galaxy A50s Combination Firmware
  • Make sure that you have at least a 60% charge left on your Galaxy A50s.

Once you have the above prerequisites, remove FRP lock on Galaxy A50s using ODIN: you can proceed with the steps.

Steps to Remove FRP on Samsung Galaxy A50s Using Combination Firmware

1- Restart Your Samsung Galaxy A50s in DOWNLOAD MODE

  • Turn off your Samsung Galaxy A50s
  • Press & hold the Power button + Volume Up button at the same time.
  • Release all buttons when you see Recovery Mode.
  • Choose Reboot to Bootloader then press on the Power button to confirm.
  • Connect your Samsung Galaxy A50s to your PC via the USB cable
2- Run the “Odin” file as an administrator.
3- Check that the USB port number is displayed.

4- Click on “AP” and import the Samsung Galaxy M30s Combination Firmware file.

5- Click “Start” to begin the installation.

6- Once the message “PASS” Displayed, unplug your Samsung Galaxy A50s from your PC.

We will not be responsible for any internal/external damages to the device that may happen while/after following this guide.

Post a Comment

Previous Post Next Post