Ads Top

Huawei P30 Firmware Flash File (Stock ROM)

Here you will find the Huawei P30 Firmware Flash File. If you’re looking to download the correct Firmware Flash File for your Huawei P30 , then worry no more. You can now download and install the Stock firmware on Huawei P30 by following our guide given at the end of this article.


Talking About Huawei P30 smartphone runs on Android v9.0 (Pie) operating system. The phone is powered by Octa core (2.6 GHz, Dual core, Cortex A73 + 1.92 GHz, Dual core, Cortex A76 + 1.8 GHz, Quad core, Cortex A53) processor. It runs on the HiSilicon Kirin 980 Chipset. It has 6 GB RAM and 128 GB internal storage.

 

Download Huawei P30 Firmware Flash File (Stock ROM)

The Stock ROM is the factory firmware which comes preinstalled on your device. This stock firmware is completely stable and doesn’t have any bugs or issues. In case you are facing lagging issues, performance issues, camera lag issues then you can easily fix them via installing Firmware Flash File on your device. Since Android is one of the highly customizable software and there is a possibility that we may end up in a situation of lag, boot loop or soft brick. Then, this guide will be helpful to you.




How to install Stock Firmware on Huawei P30

After you have downloaded the stock firmware for your device, you can install it easily using this guide. Please follow the instructions given below to flash the stock firmware on your device. But before that, take a look at the pre-requisite.



Steps to Install Stock Firmware on Huawei P30
  1. First of all, Download the Update Package
  2. Recommended: Format the Micro SD card (This operation is optional).
  3. Now Unzip the Update.zip package and
  4. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
  5. Now on your phone, Open the dialer and call ->enter: *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK,upgrade process
  6. Now select the Update.app that you moved to SD Card (root directory).
  7. Now you will see a screen which shows the installation process. Progress Huawei
  8. Wait until the installation process completes.
  9. When the progress bar stop, the phone will restart automatically
  10. In case if you have the Data File and you want to flash it, then, first of all, delete the earlier moved update.app from the dload folder
  11. Then you can extract the second file (update_data_Xxxxx) from above and move the new update.app to the dload folder.
  12.  Repeat the same 4-8 Steps above.
  13. That’s it! You have Installed Stock Firmware on Huawei Smartphone.

We will not be responsible for any internal/external damages to the device.

No comments:

Powered by Blogger.