Guide to Flash MIUI Stable Beta ROM following 2 Method:
In this tutorial, we will show Flashing/Updating to latest MIUI ROM, here we can update MIUI via recovery method (Updater App) or via fastboot method. While the concluding steps might be the same for all devices, the route taken to that step is slightly different. There might be a few extra requirements that your Mi tool might have added to this unlocking process. In that case, you will have to go through those prerequisites before you proceed ahead with the required steps. Here is everything you need to know in this regard.
We have provide the two method below for flash stable ROM on Miui device:
📔 Recovery Method- Via Updater App
About Updating to latest MIUI stable/beta ROM via updater app, you can shift from Global stable to Global Beta or China Stable to China Beta but Beta to stable might not work. Just download the zip file & move it to internal storage ( downloaded_rom) then open updater app
- Click on 3 dot top right corner- choose update package - select the zip file from internal storage.
🗒 You can take a backup of the zip file before updating in case you face issue while updating ROM
After selecting the file - Click OK- Reboot
After updating to MIUI 12/10 ROM, to do reset once is recommended if you shifted from Stable to Beta ROM.
🗒 Downgrade not recommended by Recovery method, if you do so, and success , please try reset once after downgrading.
In case you're facing any error while updating via updater app then please do a clean flash Via Fastboot method.
📔 Fastboot Method
⚠ Warning! This method will work only for unlocked devices.
👉 If your device not unlocked then read previous guide: Unlock Bootloader MIUI 12 Stable Beta ROM
1. Download Fastboot ROM for your Device Click here ( Now temporarily link will not work for some issue)
👉 Makes sure you're downloading Proper ROM for your device, else the device might get BRICK.
so, before downloading check & confirm with your device code name
2. Download & Install Mi Flash Tool on Your PC. Click here for Mi Flash Tool Beta
👉 Before installing disable Windows Firewall & make sure that you disabled Driver Signature Enforcement for that Reboot your PC in Advanced Mode and Choose Disable Driver Signature by choosing F7. for guide click here
3. Go to Setting My Device All Specs Tap On MIUI Version 7 times Additional Setting Developer Options Enable USB Debugging
- 👉 Make sure to backup your data before updating.
- 👉 If you want to shift from Developer ROM to Stable or Global ROM to China ROM, flashing ROM would require wiping all data, otherwise it might cause serious damage to your device.
4. Now Reboot Your device into fastboot method, For that simply turn off your device, press the Power button and Volume down ( – ) button at the same time. Then connect the device to the Windows PC/laptop via a micro USB cable.
5. Now open download folder, then extract the downloaded ROM via Winrar / WinZip/other zip/ rar Extract Software & then copy the file to C:// drive then Copy the complete path of the file.
👉 Now launch Mi Flash Tool via run as administrator
👉 Now press the Refresh button, You can see that your device is detected
6. Now paste the copied path address in the Miflash tool address bar & make sure you've chosen CLEAN ALL then hit on FLASH
👉 Do not disconnect your device & PC while flashing running
👉 Then you can see device started flashing & it'll take few minutes to complete, Wait for status (Flash done) & Result (Success)
Then Device will Boot up automatically
I hope It'll be helpful for you. Enjoy the flashing MIUI 12 or MIUI 11 {:7_247:}
Post a Comment