Symphony D54+ Flash File MT6260A-All Version (HW1-HW2-HW3)

Download Symphony D54+ Flash File MT6260A Collection

Are you thinking of flashing your Symphony D54+ mobile phone and looking for the desired flash file? Then this post may be helpful for you. So read the whole post carefully, because I have shared all version flash file download link of all the equipment including USB driver, Flash tool to flash the Symphony D54+ mobile phone. Also discussed the flushing procedure step by step.


The Symphony D54+ Flash File is using to solve Remove pin, Junk virus, Full Flash, Downgrade, Upgrade Firmware, Re-install of your Symphony device. The flash file currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.




Software Details:

File Name: Symphony D54+

File Type: Bin

Processor: MediaTek MT6260A

File Size: 8MB

Item: include 3 Version File

Supported Tools: Miracle, Eagle, Volcano, GSMAladdin, CM2MTK, Dragon etc.



Download Symphony D54+ Flash File (Firmware)

Here is the download link three version of Symphony d54+ flash file, First select the file of your choice then download.



MT6260_S00.D54+_HW1_V6 | Download


MT6260_S00.D54+_HW2_V7 | Download



MT6260_S00.D54+_HW3_V10 | Download



How to Flash Symphony D54+

Before flashing the flash file on your Symphony D54+, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. Take a complete backup of your device after start flashing process.




Step to Flash Symphony D54+

Following below steps to flash your Symphony D54+ Mobile phone.

  1. Download and extract the D54+ flash file on your computer.
  2. Install the MTK USB Driver on your computer.
  3. Lunch tool on your PC screen
  4. Select MTK crack/Cm2MTK or another tool
  5. Choose MT62xx
  6. Add file on the tool
  7. Click the Start button.
  8. Connected your phone USB cable to computer.
  9. Insert battery in mobile.
  10. That's ok! Now started your flash the process.


That’s it, guys. We hope that you’ve installed the flash file on your device successfully.


Post a Comment

Previous Post Next Post