Walton Primo GH9 Flash File Official Firmware ROM

Download Walton Primo GH9 Stock Firmware ROM

Are you thinking of flashing your Walton Primo GH9 smartphone and looking for the desired Stock ROM? Then this post may be helpful for you. So read the whole post carefully, because I have shared the download link of all the equipment including flash file, USB driver, flash tool to flash the Walton Primo GH9 smartphone. Also discussed the flushing procedure step by step.



The Walton Primo GH9 Flash File Stock ROM is using to solve Hang Starting Logo, Harmful Virus, Slow performance, Internal storage full, System file missing and Corruption, Remove privacy lock, Remove password, Full Flash, Downgrade, Upgrade Firmware, Re-install and many problems. So if you encounter any of the above problems then you download the Walton Primo GH9 flash file, you use this firmware without any problem.
You can flash and useful your smartphone.

Talking about: The Walto Primo GH9 smartphone runs on Android 10 operating system. The smartphone a 6.1 inch IPS LCD display. The phone comes with a 13 MP+0.3 MP dual primary camera with an LED flash and an 5 MP Single selfie camera. It has memory of  2GB RAM and 16GB ROM. The phone is powered by a 1.8 GHz Quad-Core ARM Cortex- A53 processor with Helio A20 chipset. This phone comes with a non-removable Li-Po 3000 mAh battery.

The Walton Primo GH9 Stock ROM currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.



Software Details:


Device Name: Walton Primo GH9 

Flash Version: Primo_GH9_V10_20200021 

Processor: MediaTek Helio A20 

Android Version: Android 10 

ROM Type: Official 

Gapps File: Included 

Tool Supported: SP Flash Tool



Download Walton Primo GH9 Flash File (Stock ROM Firmware)


Here is the download link of Walton Primo GH9 Stock ROM flash file, First check Software details section above after then download.



File Name

Download Link

Walton Primo GH9


USB Driver

Download Now

Flash Tool

Download Now



How to Flash


Before flashing the flash file on your Walton Primo GH9, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Firmware importance and firmware details above.




  • To install/Flash Stock ROM On Walton Primo GH9, you need a laptop/PC.
  • Charge the Primo GH9 device to a sufficient battery level to minimum 70%.
  • We strongly recommend you to take a complete full backup of your personal data, including the internal storage. The phone will be formatted, so be prepared for it. You can also follow our Android backup guide for the same.
  • You need a USB cable to connect your phone to PC.
  • Download Latest SP Flash Tool
  • Download & install Android USB Drivers



Step to Flash Walton Primo GH9


Click to follow full guide for Flash Walton Primo GH9| CLICK HERE


That’s it, guys. We hope that you’ve installed the flash file on your device successfully.


Post a Comment

Previous Post Next Post