Walton Primo H9 Pro Firmware Flash File MT6771 (Stock ROM)

Download Walton Primo H9 Pro Flash File Firmware (Stock ROM)

If you are search Walton Primo H9 Pro MT6771 Android version 10.0 firmware? Than you comes on right place. Here we are provided the Walton Primo H9 Pro tested firmware for you. Also, we are provided Latest USB drivers, Flash tool and below the article installing guideline has mention at How-to-install.

 

 

Why use the Walton Primo H9 Pro Stock Firmware ROM?

The Walton Primo H9 Pro Firmware Flash File (Stock ROM) is using to solve Hang Starting Logo, Monkey Virus, Slow performance, Internal storage full, System file missing and Corruption, Remove privacy lock, Remove password, Full flash and many problems. So if you encounter any of the above problems then you download the Walton Primo H9 Pro firmware, you use this firmware without any problem. You can flash and useful your phone.

 



Talking about Spec: Walton Primo H9 Pro smartphone runs on Android v8.0 operating system. It powered by MediaTek MT6771 Chipest with Helio A20, 1.8 GHz clock speed processor. It has 4GB RAM and +4GB ROM. Walton Primo H9 Pro has a 6.1" IPS LCD display. On a 8MP front & Triple Rear Cameras 13MP+5MP+0.3 with Fastest Fingerprint Sensor . It is backed by a 4000mAh High Capacity Battery. Connectivity features in the smartphone include WiFi, Bluetooth, GPS, Volte, and more.

 

The Walton Primo H9 Pro Stock Firmware currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.

 

 

Software Details:

  • Device Name: Walton Primo H9 Pro
  • File Type: Scetter
  • RAM: 4GB
  • ROM: 64GB
  • Gapps File: Included
  • Processor: MediaTek MT6771
  • Tool Supported: SP Flash Tool
  • Android Version: Android 10
  • Zip File Size: 3GB

 

 

Download Links:

 


USB Driver: Download MediaTek Helio USB Drivers

Flash ToolDownload Sp Flash Tool - Latest

Firmware LinkDownload Walton Primo H9 Pro MT6771 Firmware File

 

 

 

How to Install Stock ROM

 

Before flashing the flash file on your Walton Primo H9 Pro, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the pre-requisite and steps below. But let’s take a quick look at the firmware details above.

 

 

Pre-Requisite

  • Download the SP Flash Tool : Download and Extract it.
  • Download – Install the USB Driver on your computer (still compatible with your phones).
  •  Charge your phone to at least 70%.
  • Backup your android device just in case if you need it later.
  • You need either windows PC.

 

 

Step to Install Stock ROM on Walton Primo H9 Pro

 

  1.  Power off your android phone and remove the battery (If it's removable).
  2. Download and Install Android USB Driver on your windows PC. (In case are already installed on your windows than skip this step).
  3. Download and extract Sp Flash Tool on your computer.
  4. Now open Sp Flash_Tool .exe
  5. Once Sp Flash Tool is Launched, Click on the Download tab.
  6. In the Download tab, Now Click on the scatter-loading button.
  7. Now, Locate the Scatter File ( you will find the scatter file in the Stock firmware ROM folder).
  8. Now, Click on the Download button to begin in the Flashing Process.
  9. Now, Connect your android phone to the PC via USB cable (without battery - If it's removable)
  10. Now, Quickly insert battery in your android phone.
  11. Once flashing is completed, A Green Ring on Right Mark will appear.
  12. Now disconnect your phone from you PC.

 

Congratulation !! Now your Android phone is successfully running the Stock Firmware ROM you have Downloaded.

 

That’s it, guys. We hope that you’ve installed the flash file on your device successfully.

 


Post a Comment

Previous Post Next Post