Kgtel i9 Flash File MT6261DA 100% Tested (Firmware)

Download Kgtel i9 MT6261DA Flash File (Firmware)

On this page, You will find out the Kgtel i9 Flash File Firmware [Stock ROM] direct download link. Also in addition page from this, Kgtel i9 mobile phone unofficial images. We've provide the new phone to reading flash file package.

The Kgtel i9 Flash File is using to solve Full Flash, Dead Recovery, Remove Pin, Downgrade, Upgrade Firmware, Re-install of your i9 device. The flash file currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.




Phone found! [ 5 ]
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_SN : 5F5CF8D6458137304AA93B135B666037
BROM Protocol Version : 05
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : TIANQING61D_CT351_A24220_BE_PCB01_gprs_MT6261_S00.CT_MT351_3232_240320_A24220_I9_V03.bin
FileVersion : CT_MT351_3232_240320_A24220_I9_V03
Saved to : C:\InfinityBox\CM2MTK\Read_out\TIANQING61D_CT351_A24220_BE_PCB01_gprs_MT6261_S00.CT_MT351_3232_240320_A24220_I9_V03.bin
Elapsed: 00:00:16
Reconnect Power/Cable!



Download Kgtel i9 Flash File (Firmware)

Now, once you have download the Kgtel i9 Flash Firmware File [Stock ROM] from the below link;

How to Flash

Before flashing the flash file on your Kgtel i9, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. Take a complete backup of your device after start flashing process.

Step to Flash Kgtel i9


Following below steps to flash your Kgtel i9 mobile phone using CM2/Miracle or other's flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.

  1. Download and extract the flash file on your computer.
  2. Install the USB Driver on your computer.
  3. Lunch tool on your PC screen
  4. Select MTK
  5. Choose MT62xx
  6. Add file on the tool
  7. Click the Start button.
  8. Connect your device to computer via USB cable
  9. Insert battery in mobile.
  10. That's ok! Now start your flash process.

That’s it, guys. We hope that you’ve installed the flash file on your device successfully.

Post a Comment

Previous Post Next Post