Kgtel K1 Flash File (All Version) 6531E 100% Tested

On this page, You will find out the Kgtel K1 Flash File All version fixed Firmware [Stock ROM] direct download link. Also in addition page from this, Kgtel K1 Folding mobile phone unofficial images. We've provide the new phone to reading flash file package.

 


 

The Kgtel K1 Flash File is using to solve Full Flash, Dead Recovery, Remove Pin, Downgrade, Upgrade Firmware, Re-install of your Kgtel device. The flash file currently comes in a zip package and we are publishing below this firmware all details. you first check the details before download the firmware. Because you will facing any problems for which we will not be responsible in any way.

 

kgtel k1 flash file

 


 

Download Kgtel K1 Flash File All Version 100% Tested

Here we have added Kgtel K1 all version flash file. First of choose your desired version after download. Now, once you have download the Kgtel K1 Flash Firmware File [Stock ROM] from the below link:

 

kgtel k1 flash file

 

 

Software details:

  • File Name: Kgtel K1
  • Category: Folding
  • File Size: 4MB
  • File Type: Bin
  • Support by: SC6531E
  • Status: Tested


 



Download_Kgtel_K1_6531E_20190408

Download_Kgtel_K1_6531E_20190628

Download_Kgtel_K1_6531E_20191018

Download_Kgtel_K1_6531E_20200618

Download K1_KGTEL_EnBe_V13_0_20191014.pac

 

 

Need Also:

Flash Tool: Download Miracle Thunder Crack

USB Driver: Download SpreadTrum Driver Installation


How to Flash

Before installing the Firmware on your Kgtel K1, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Firmware importance and firmware details above.

 

Step to Flash Kgtel K1

Following below steps to flash your Kgtel K1 mobile phone using CM2/Miracle or other’s flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.

  1. Download and extract the flash file on your computer.
  2. Install the USB Driver on your computer.
  3. Lunch tool on your PC screen
  4. Select SPD
  5. Choose 6631E SP
  6. Add file on the tool
  7. Click the Start button.
  8. Connect your device to computer via USB cable
  9. Insert battery in mobile.

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Firmware device successfully. And, if we don’t work with this guide. Then do it in the comments section below.

Post a Comment

Previous Post Next Post