Lava P30 Flash File (LCD Fixed) 6531E 100% Tested

You are searching Lava P30 Flash File? You come in the right place. Using this firmware, you can flash the firmware file to troubleshoot any issues or problems on your device. Yes! With this guide, you can resolve problems such as Pin remove/unlock, Full flash, Dead recovery, As can be seen Automatically restart phone and more also fix any software related problems.

To flash the firmware file on your Lava P30, we are using the Miracle Thunder as this device is powered by SpreadTrum. We have shared all the requirement files to download and install the firmware on your device.

Lava P30 Flash File SPD6531E (Firmware) 100% Tested

Download Lava P30 Flash File (Fixed LCD) 100% Tested

File Name: Lava P30
Processor: SC6531E
File Type: Bin
File Size: 4MB


Flash Tool: Miracle Thunder

Need also: Lava C22 Flash File SC6531E


How to Flash

Before installing the Firmware on your Lava P30, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Firmware importance and firmware details above.



Step to Flash Lava P30

Following below steps to flash your Lava P30 mobile phone using CM2/Miracle or other’s flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.

  1. Download and extract the flash file on your computer.
  2. Install the USB Driver on your computer.
  3. Lunch tool on your PC screen
  4. Select SPD
  5. Choose 6631E SP
  6. Add file on the tool
  7. Click the Start button.
  8. Connect your device to computer via USB cable
  9. Insert battery in mobile.

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Firmware device successfully. And, if we don’t work with this guide. Then do it in the comments section below

Post a Comment

Previous Post Next Post